Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[khatton]

started to clean my breather system today v6 2.5 in the guide it says you should be able to blow through all 4 pipes my pipe marked up pipe 3 on the guide wont clear i blow down it and it is solid i proded and poked sprayed carb cleaner but still blocked cant blow down it others are fine what happens if i give up and put it back on like that want to do it right but it wont clear got it full of carb cleaner tonight but i did last night and it didnot clear any ideas please.

[Darth Loo-knee]

It does need doing mate

[dbug]

Don't put it back if its still blocked - buy a new bit of pipe - wont break the bank and cheaper than cam cover gasket set!!

[khatton]

its not a pipe its the black box on top of the pendulam think i spelt that right

[willyboy]

Think he means the assembly

[Entwood]

Use a piece of thin stiff wire VERY GENTLY AND CAREFULLY .. I used a straightned out wire coat hanger - the sort that comes from dry-cleaners - ... just bent the last 1/2 inch off by a tiny wee bit and used it to scrape out as much as possible, then soaked in carb cleaner, then used an airline from the centre bit where the funny gasket goes , took a while but got there eventually...

patience, dear chap, patience ...