Topic: Plug connection under rear seat, n/s (Read 832 times)

Hoffi · « **on:** 10 October 2008, 12:28:17 »

Came accross this a while ago but didn't get to ask: As I have removed my rear seat for cleaning I found three wiring connectors under the left part of the seat from which two (square format) seemed to fit together, the third one (flat) I guess is for rear seat heating which I don't have.
As I have the board computer telling me that I have an headlight vision issue I was wondering if that might be related to that.

So before just plugging the connectors together I first want to check that I am not messing anything up. And also good to know what that wiring is for.

BTW: Can anybody recommend a workshop manual? Don't mind if it is a disk or a book, just want to have something usable.

Again: Thanks for your replies!

ngrainqey · « **Reply #1 on:** 10 October 2008, 13:27:02 »

get a haynes manual! lol
im not sure about the rear heated seat cables as i dont think mine has them.... without knowing i'd suggest either... cd changer cable, arial amp cable and then obviously heated seat cable- hope that helps

Hoffi · « **Reply #2 on:** 10 October 2008, 19:39:45 »

@ngrainqey: Is the Haynes manual of use?

Thanks for your suggestion. As I have some work to be done on my Meggy tomorrow I will check if both connectors fit and than plug them together and see what is happening. Try and error!

News:

Author Topic: Plug connection under rear seat, n/s (Read 832 times)

Hoffi

Plug connection under rear seat, n/s

ngrainqey

Re: Plug connection under rear seat, n/s

Hoffi

Re: Plug connection under rear seat, n/s