Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: rocker cover bolts.  (Read 621 times)

0 Members and 1 Guest are viewing this topic.

unlucky mark mv6

  • Omega Knight
  • *****
  • Offline Offline
  • tipton,west mids
  • Posts: 1904
    • View Profile
rocker cover bolts.
« on: 04 May 2009, 15:15:41 »
I have oil seeping from a couple of the rocker cover bolts on my 3.2.Can you replace the rubber o-rings which im led to believe it is,and do you have to strip everything,or just take the bolt out.
Logged
Machine polishing in west mids £40 also body repairs.pm me for more info.

Bent valve

  • Senior Member
  • ****
  • Offline Offline
  • 0
  • Posts: 950
    • View Profile
Re: rocker cover bolts.
« Reply #1 on: 04 May 2009, 15:26:45 »
 The o rings are under the cover. you would have to remove them which would also mean replacing the gaskets.
Logged

feeutfo

  • Guest
Re: rocker cover bolts.
« Reply #2 on: 04 May 2009, 15:29:11 »
try re torquing to 8nm (not a penny more mind) i had a couple weep and they where loose. Do NOT over tighten.

There is a guide in maintenance re cam cover gaskit and o poing replacment. It involves removing plenum etc.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.046 seconds with 17 queries.