Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: is he correct?  (Read 1360 times)

0 Members and 1 Guest are viewing this topic.

portomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Port Talbot, S. Wales
  • Posts: 313
    • View Profile
is he correct?
« on: 13 May 2009, 14:43:34 »

I was in work last night and a guy i work with suggested that i spray WD40 into the throttle body to clean it out?? is that right? because i was tellling him about cleaning out the breather system and he said just take off the large black plastic piping that goes onto the top of it and then just spray some WD40 onto the valve put the black pipe back and let it run for a while?? surely that cant be good for the engine? lol
Oh and hes an Audi man , doesnt really now anything about Vauxhalls  ::)
Logged

Omega man 2

  • Omega Knight
  • *****
  • Offline Offline
  • 0
  • Posts: 1392
  • If all else fails, get out the oxy!
    • View Profile
Re: is he correct?
« Reply #1 on: 13 May 2009, 14:45:07 »

I wouldn't spary wd40 down the manifold :o

Better off taking it off and using proper carb cleaner :y
Logged

portomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Port Talbot, S. Wales
  • Posts: 313
    • View Profile
Re: is he correct?
« Reply #2 on: 13 May 2009, 14:48:08 »

so take the throttle body off and just clean that with the carb cleaner? sounds more sensible lol im glad i didnt do it now, i had the can ready to spray but then had second thoughts!!  :o there was quite a bit of dark black oil around the top part of the throttle body valve is that normal?
Logged

Omega man 2

  • Omega Knight
  • *****
  • Offline Offline
  • 0
  • Posts: 1392
  • If all else fails, get out the oxy!
    • View Profile
Re: is he correct?
« Reply #3 on: 13 May 2009, 14:52:45 »

Its normal to be dirty if it hasn't been cleaned ;D

If your doing this because the revs are going up and down you'll need to take off the idle control valve and spray inside there :y
Logged

cem_devecioglu

  • Guest
Re: is he correct?
« Reply #4 on: 13 May 2009, 14:53:40 »

I wont buy his Audi never thats sure ;D :y
Logged

Omega man 2

  • Omega Knight
  • *****
  • Offline Offline
  • 0
  • Posts: 1392
  • If all else fails, get out the oxy!
    • View Profile
Re: is he correct?
« Reply #5 on: 13 May 2009, 14:55:25 »

Here's the guide :y

http://www.omegaowners.com/forum/YaBB.pl?num=1194007453

Its a 2.0 but similar the the 2.2. I doubt you'll have to take the IACV apart
« Last Edit: 13 May 2009, 14:55:47 by Omega_Man »
Logged

portomega

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Port Talbot, S. Wales
  • Posts: 313
    • View Profile
Re: is he correct?
« Reply #6 on: 13 May 2009, 14:56:46 »

no the revs are fine on it, but i was nosing around the engine bay and notice around the throttle body where the black pipe connects to the top there was quite a bit of black sludge leaking out , i gave that all a wipe down, and wiped inside the top of the throttle body to remove wat oil was in there too
No dont ever buy his Audis!!! hes got 2 parked at work and both are shafted , one has a small swimming pool in the back passenger foot wells lol
Logged

Grumpy

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Manchester
  • Posts: 645
    • View Profile
Re: is he correct?
« Reply #7 on: 13 May 2009, 17:26:38 »

Very good guide on the following link by Auto Addict
for the 2.2.

http://www.omegaowners.com/forum/YaBB.pl?num=1162397695

Spraying WD40 into it is laughable.

WD40 is a water dispersant and will leave a sticky
residue that is likely to attract gunge and build
up problems for you.
Logged
Pages: [1]   Go Up
 

Page created in 0.028 seconds with 17 queries.