Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SJKOO01]

Hi.

Need to remove the Passenger & Driver A-pillar covers on a facelift model, to run some electrical cable down them for an accessory.

Just need to know if its a simple case of unbolting the grab handles, and unclip the covers, or do you need some kind of special tool to take them off, as don't want to use a large blade screwdriver in the assumsion that the just unclip, then I go and break them ?!.   

Can anyone advise please ?

Thanks.

M

[kcl]

IIRC There are two or three "regular" type of clips that are attached to the pastic cover and the pin-end of the clip goes in a hole in metal (could it be explained more unclear  ) But you'll figure it out when taking the cover off, just needs to be pulled sharply to free the clips.

[SJKOO01]

Thanks for letting me know 

[MikeDundee]

heres some pics of the b/c pillars

[SJKOO01]

Thanks for sending pics for other pilliars.

Managed to do the job without too much trouble.

Regards

M