Topic: engine hesitating slightly on gearchange (Read 849 times)

chuftsmv6 · « **on:** 07 June 2009, 01:18:03 »

hi there my omega seems to hesitate slightly on gear changes is this normal on omegas im not sure ive only owned one and it cuts out sometimes when i give it some stick and stop at junctions if anyone could help that would be fantastic ive always wondered for a while now if its normal with omegas its a3.0mv6 1998 with 89000 on the clock that i converted to manual about 18mths ago thanks

feeutfo · « **Reply #1 on:** 07 June 2009, 01:24:20 »

any codes?

chuftsmv6 · « **Reply #2 on:** 07 June 2009, 01:25:13 »

hi no codes ive had it all checked

feeutfo · « **Reply #3 on:** 07 June 2009, 01:31:41 »

weeell, could be icv stalling at stand still, and if the revs drop enough during gear changes, could it be stalling momentarilly then being bump started when you let the clutch up again....maybe?

by the way, you,re aware of the paper clip test to flash your own engine codes out?

chuftsmv6 · « **Reply #4 on:** 07 June 2009, 01:37:56 »

whats the paper clip test and the icv thingy :-?

News:

Author Topic: engine hesitating slightly on gearchange (Read 849 times)

chuftsmv6

engine hesitating slightly on gearchange

feeutfo

Re: engine hesitating slightly on gearchange

chuftsmv6

Re: engine hesitating slightly on gearchange

feeutfo

Re: engine hesitating slightly on gearchange

chuftsmv6

Re: engine hesitating slightly on gearchange