Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ajn]

hello ive replaced the heater bypass valve today but cant see where the thin pipe on top of the h.b.v is ment to go any ideas cheers ajn

[The Red Baron]

hello ive replaced the heater bypass valve today but cant see where the thin pipe on top of the h.b.v is ment to go any ideas cheers ajn

do you mean the little vac pipe ontop of the valve? this comes from the bulkhead near where the matrix pipes go through, thin black pipe with a rubber elbow that goes on the top of the valve.

[Welung666]

At the HBV end or the other end?

[ajn]

At the HBV end or the other end?

thanks for the replys ive got a rubber elbow off the hbv and about 4 inch thin pipe nothing on the end and cant see where it goes

[The Red Baron]

At the HBV end or the other end?

thanks for the replys ive got a rubber elbow off the hbv and about 4 inch thin pipe nothing on the end and cant see where it goes

if i remember right, this should plug into the bulkhead between the matrix pipes. should be a rubber connector there.

[ajn]

ok thanks lads ill have a look tommorow not an enjoyable job the hbv

[The Red Baron]

ok thanks lads ill have a look tommorow not an enjoyable job the hbv

not really, plenty of finger cutting & swearing

[RobG]

hello ive replaced the heater bypass valve today but cant see where the thin pipe on top of the h.b.v is ment to go any ideas cheers ajn

http://www.omegaowners.com/forum/YaBB.pl?num=1152565204

[ajn]

At the HBV end or the other end?

thanks for the replys ive got a rubber elbow off the hbv and about 4 inch thin pipe nothing on the end and cant see where it goes

if i remember right, this should plug into the bulkhead between the matrix pipes. should be a rubber connector there.

:ysorted thanks for all replys ajn

[The Red Baron]

well done