Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: EGR BLANKING PLATE  (Read 616 times)

0 Members and 1 Guest are viewing this topic.

SnakePliskin

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Anglesey
  • Posts: 91
  • OMEGA MV6 Estate Manual Owner
    • View Profile
EGR BLANKING PLATE
« on: 18 February 2010, 14:37:34 »
I have just carried out the EGR blanking modification using a shaped and cut blank to fill the gap and an EGR gasket on each side. So it has been done to stop any leaks

My question is........

On X25XE Vectra V6's this modification is a common one and has proven gains. What gains will this provide for my X30XE?
Logged
Love VX's always Have

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: EGR BLANKING PLATE
« Reply #1 on: 18 February 2010, 15:26:12 »
It will cure any EGR faults from affecting the way the car runs. No performance or economy gains to be had (on the mig, or the Vectra).
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34016
  • Git!
    • View Profile
Re: EGR BLANKING PLATE
« Reply #2 on: 18 February 2010, 16:14:52 »
Indeed, no performance gains or economy gains to be had the only minor benefit may be a slightly improved throttle response if flooring it after crusing at constant speed.

Note, you only need 1 gasket between the blank and the mounting bracket....you dont need one between the blank and EGR valve
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.032 seconds with 17 queries.