Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hawksy]

on my multi function display a warning has come up saying - LOW BEAM FLD / VISION i have checked all lights and everything is working , the car is a 2003 omega elite 2.2 dti with xenon lights , can any help.
                  
                          regards mike

[Andy B]

Sensor on FRS wishbone or sensor on RNS radius arm or a level motor in either or both headlamps goosed. very well documented 

[hawksy]

thanks for your quick reply , can you tell me what frs is please and if it is level motors can they be replaced or is it new lights required , regards mike

[Lizzie_Zoom]

Have a look at the sensor first to see if the common fault of the arm being disconected has taken place.

This is the new style sensor in question:

[hawksy]

just had a quick look at sensor and arm is very loose / broken ,will look tomorrow in day light , thanks for your help , regards mike

[ferrari jason]

if its loose its prob popped off the ball joint i had this prob on my old diesel omega that i taxied i found some off that white plumbers ptfe tape worked to tighten it up

[megaomega123]

A cable tie to hold it in it's holder has done the job for me for over a year now 

[Andy B]

thanks for your quick reply , can you tell me what frs is please and if it is level motors can they be replaced or is it new lights required , regards mike

Ooops! FNS front near side 

[hawksy]

hi , just a quick update checked front n/s wishbone this morning and popped arm back into socket , quite a tight fit so hopefully every will be ok , as warning message has gone off mfd , many thanks again for the info , regards mike