Topic: Re-setting airbag light? (Read 816 times)

littleimp · « **on:** 28 July 2010, 15:33:56 »

Is this a tech 2 job or can anyone recommend an ebay obd that will fix this?

I replaced the ignition barrel and turned on ignition without the drivers airbag plugged in not realising this will keep the airbag light lit when put back together. My fault I know, should have dis-connected battery. I'm looking at getting a scanner though so this gives an excuse.

p.s. Forgot to mention it's a 'r' reg 2.5 elite.

tunnie · « **Reply #1 on:** 28 July 2010, 15:35:51 »

yup, tech2, worth posting up your location, we may have one near you

littleimp · « **Reply #2 on:** 28 July 2010, 15:59:25 »

I'm in clacton-on-sea, essex, uk

Agemo · « **Reply #3 on:** 28 July 2010, 21:01:39 »

You will find that ""My Naff Code Reader"s" or similar will reset the light, it would probably cost more for stealer to reset than to buy one.

littleimp · « **Reply #4 on:** 01 August 2010, 17:59:12 »

Quote

You will find that ""My Naff Code Reader"s" or similar will reset the light, it would probably cost more for stealer to reset than to buy one.

Yep, been looking into that one and will go that route. Will come in handy later on so seem the better investment.

News:

Author Topic: Re-setting airbag light? (Read 816 times)

littleimp

Re-setting airbag light?

tunnie

Re: Re-setting airbag light?

littleimp

Re: Re-setting airbag light?

Agemo

Re: Re-setting airbag light?

littleimp

Re: Re-setting airbag light?