Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skyblue]

The drivers door button looks like its sticking when I use the fob to lock /unlock it....hence why im useing the key now to lock/unlock it. All the other door buttons popup/down without any problem at all . Before I   start taking off door cards etc is there  easier way to resovle this problem???

[Varche]

Mine did the same and I nearly resigned myself to having to change the solenoid but I sprayed some WD40 carefully down the sides of the button and it magically started working again! Been working for over six months now. Worth a try but taking the door card off isn't that hard a job. See maintenance guide.

[skyblue]

Thanks for that mate.... will give it a go as its too bloody cold to be out there for hours on end mucking about with cars 

[TheBoy]

I had to do the MV6's solenoid the other day.  Its ssoooo nice now to not have to fumble with the key

[Kevin Wood]

I had to do the MV6's solenoid the other day.  Its ssoooo nice now to not have to fumble with the key

Want a replacement microswitch for it?

Kevin

EDIT: Or did we have this conversation? Mullered during removal?

[skyblue]

I had to do the MV6's solenoid the other day.  Its ssoooo nice now to not have to fumble with the key

thanks for that, looks like I will be getting cold very soon then Could you give us a rough idea of the cost of it please

[TheBoy]

I had to do the MV6's solenoid the other day.  Its ssoooo nice now to not have to fumble with the key

Want a replacement microswitch for it?

Kevin

EDIT: Or did we have this conversation? Mullered during removal?

Ah, yes, I will put it in the pile for you...   ...microswitch tests good with a meter (both of them)...