Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[henryd]

I have just picked up a set of 3.0 cams for my 2.5,are 3.0-2.5 sprockets all the same,I asume I use the original sprockets again,hopefully someone will confirm

thanks
Henry

[Andy B]

I have just picked up a set of 3.0 cams for my 2.5,are 3.0-2.5 sprockets all the same,I asume I use the original sprockets again,hopefully someone will confirm

thanks
Henry

I'd assume both 2.5 & 3.0 cam pulleys are the same as each other, otherwise you'd need different cam belts for each engine. 

[Marks DTM Calib]

They are the same

[henryd]

Thank you chaps,I have the 3.0 inlet divider on the way so almost time to commence battle

[henryd]

started to strip it down today,thought I would check belt timing before pulling it off,glad I did,both banks about half a tooth out .This is a gm kit fitted by a vauxhall tec 10000 miles ago just before I got the car,still,might explain why I have always thought it was a bit heavier on fuel than it should be