Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pizza dude]

hello wanting to remove wing from facelift model, is it the same as on preface as i haynes manuel for the preface?

just so i'm not looking for hidden bolts anywhere, cheers dave.

[Welung666]

Exactly the same. It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

[pizza dude]

cheers buddy, exactly the same on all year of  models then!

[Welung666]

cheers buddy, exactly the same on all year of  models then!

Yep

[ScaniaV8]

As a matter of interest will a facelift model front wing fit directly onto a pre-facelift model with no problems?

thanks

[Andy B]

As a matter of interest will a facelift model front wing fit directly onto a pre-facelift model with no problems?

thanks

yes ....... because they're both the same.           

[RobG]

As a matter of interest will a facelift model front wing fit directly onto a pre-facelift model with no problems?

thanks

yes ....... because they're both the same.           

................apart from the wing moulding

[Andy B]

As a matter of interest will a facelift model front wing fit directly onto a pre-facelift model with no problems?

thanks

yes ....... because they're both the same.           

................apart from the wing moulding

the moulding is an accessory 

[blackviper90210]

As a matter of interest will a facelift model front wing fit directly onto a pre-facelift model with no problems?

thanks

yes ....... because they're both the same.           

So in effect you could pretty much straight swop mini facelift for a facelift front  :-? Coooool  :

[VXL V6]

Yep, just swap the mouldings!

[Andy B]

....
So in effect you could pretty much straight swop mini facelift for a facelift front  :-? Coooool  :

Yuk! 

This topic has just been discussed in the last day or so 

Bonnet, bumper, grille & headlights.

[RobG]

....
So in effect you could pretty much straight swop mini facelift for a facelift front  :-? Coooool  :

Yuk! 

This topic has just been discussed in the last day or so 

Bonnet, bumper, grille & headlights.

.....plus the under headlight trim............or is that an accessory Andy

[Andy B]

....
So in effect you could pretty much straight swop mini facelift for a facelift front  :-? Coooool  :

Yuk! 

This topic has just been discussed in the last day or so 

Bonnet, bumper, grille & headlights.

.....plus the under headlight trim............or is that an accessory Andy

I was just leaving a bit left for you