Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Door card trims  (Read 642 times)

0 Members and 1 Guest are viewing this topic.

Olympia5776

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Ireland
  • Posts: 2164
    • View Profile
Door card trims
« on: 24 June 2011, 19:28:04 »
Are the door card "wood " trims removable from a FL and if so how are they held on ?
Logged

SJKOO01

  • Guest
Re: Door card trims
« Reply #1 on: 24 June 2011, 19:45:45 »
There plastic riveted on. 

First carefully drill down the holes of the rivets, making sure you don't drill too far (about 3 to 5mm), then drill the head off the rivets, then you can remove them.

Use a self tap screw with a washer to replace them.

 :y
« Last Edit: 24 June 2011, 19:46:46 by SJKOO01 »
Logged

blackviper90210

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Bromsgrove, West Midlands
  • Posts: 2486
    • 03 3.2 Elite Saloon
    • View Profile
Re: Door card trims
« Reply #2 on: 24 June 2011, 20:22:44 »
I used a flat blade screwdriver and gently prised them out. If your careful enough, you can just push fit them back in again!  :y

I only know as I did that to my old Elite and re sprayed them silver along with the rest of the "wood" trim

HTH
Logged
AKA - Mr Bracket

Olympia5776

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Ireland
  • Posts: 2164
    • View Profile
Re: Door card trims
« Reply #3 on: 24 June 2011, 22:02:27 »
Thanks all. :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.033 seconds with 17 queries.