Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Polybushing the front  (Read 1088 times)

0 Members and 1 Guest are viewing this topic.

geoffr70

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Sunderland
  • Posts: 2665
  • Boobies
    • F/L 3.0 Elite, 3.0 MV6
    • View Profile
Polybushing the front
« on: 25 August 2011, 22:01:50 »
Hi peeps, I have a few questions about polybushing my cars.

The powerflex bush I have seen includes the front w/b bush and the arb bush. As it doesn't include the rear w/b bush, I take it that is not as weak/liable to fail as the front? When the ball joint fails i can just replace that instead of replacing the polybuhed w/b right?

I've heard talk of people using a press to get the new bush in. I've never used a press. Does the bush just pop in and stays in under tension or does it need fixing in somehow?

As I haven't used and don't have access to a press, would some Holmatro hydraulic equipment be suitable? Imagine a big set of pliers with 29 tonnes of force?

Thanks peeps.
Logged
TC and BnQ Trade holder.
I'll out pull you with my caravan!
V6 locking kit available locally, with deposit.

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: Polybushing the front
« Reply #1 on: 25 August 2011, 22:03:24 »
Cut the old bush out and poly's don't need a press to fit as they're in 3 parts :y
Logged
Whatever it is... I didn't do it

geoffr70

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Sunderland
  • Posts: 2665
  • Boobies
    • F/L 3.0 Elite, 3.0 MV6
    • View Profile
Re: Polybushing the front
« Reply #2 on: 25 August 2011, 22:07:15 »
Quote
Cut the old bush out and poly's don't need a press to fit as they're in 3 parts :y

Thanks LD, so when I get PBs it'll be obvious how they go in? :-/
Logged
TC and BnQ Trade holder.
I'll out pull you with my caravan!
V6 locking kit available locally, with deposit.

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: Polybushing the front
« Reply #3 on: 25 August 2011, 22:09:04 »
Quote
Quote
Cut the old bush out and poly's don't need a press to fit as they're in 3 parts :y

Thanks LD, so when I get PBs it'll be obvious how they go in? :-/

Yep... Sure there's a guide somewhere :-/ :-/
Logged
Whatever it is... I didn't do it

geoffr70

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Sunderland
  • Posts: 2665
  • Boobies
    • F/L 3.0 Elite, 3.0 MV6
    • View Profile
Re: Polybushing the front
« Reply #4 on: 25 August 2011, 22:10:02 »
I saw the one about getting the old ones out. I'll check again.

Thanks
Logged
TC and BnQ Trade holder.
I'll out pull you with my caravan!
V6 locking kit available locally, with deposit.

manolo

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 148
    • View Profile
Re: Polybushing the front
« Reply #5 on: 25 August 2011, 22:21:24 »
« Last Edit: 25 August 2011, 22:22:14 by manolo »
Logged

geoffr70

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Sunderland
  • Posts: 2665
  • Boobies
    • F/L 3.0 Elite, 3.0 MV6
    • View Profile
Re: Polybushing the front
« Reply #6 on: 25 August 2011, 22:25:26 »
Don't know, I replaced mine with standard, but the old ones looked ok, so don't think I'll bother for the life of the car. Omegas rule :y
Logged
TC and BnQ Trade holder.
I'll out pull you with my caravan!
V6 locking kit available locally, with deposit.

manolo

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 148
    • View Profile
Re: Polybushing the front
« Reply #7 on: 25 August 2011, 23:07:58 »
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.035 seconds with 17 queries.