Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bob G]

Exhaust is blowing seesm to be at the mesh type flexible joint (not had chance to crawl under yet) is there a simple fix or if I need to repalce parts how much of the exhaust needs it?

[albitz]

Flexi section can be bought seperately (ebay iirc) and I believe it then needs welding onto the original exhaust.
Im sure experienced 4 pot owners will be along shortly with more deatails.

[Bob G]

Albs, that does make me feel a bit better, I assume you mean one of the one size fits all type that are on there? if so it is not going to be a drain on the national debt  [smiley=2vrolijk_08.gif]

[RobG]

This one Bob
http://www.ebay.co.uk/itm/2-x-4-Exhaust-Flexi-Repair-Joint-100-x-50-Flexipipe-/320600194946?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa542bf82

[Bob G]

Many thanks Rob, was looking at them and there is a mass of them so your help invaluable, as for the other items under discussion, I will be underneath tommorow so will let you know.  It could be or

[RobG]

Many thanks Rob, was looking at them and there is a mass of them so your help invaluable, as for the other items under discussion, I will be underneath tommorow so will let you know.  It could be or

[tunnie]

that will fit, just make sure its welded back in the right place so it mounts back to the exhaust ok. 

[TheBoy]

Buy the seperate flexi as suggested.

Its part of the cat section - do NOT be talked into replacing entire cat section, as pattern cats are useless and noisy