Topic: Aftermarket HU && AMP Wiring. (Read 1187 times)

sjeden · « **on:** 30 November 2009, 13:32:07 »

Hey,

im new to the omega, i just bought an aftermarket HU to replace the standard HU, im just wondering how to wire the amp and sub i have.

I have a corsa which just unscrews by a few torx bits here and there. What is the omega like for access places to run the cables.

is there a tutorial anywhere?

Thanks alot

mathewst · « **Reply #1 on:** 30 November 2009, 13:40:09 »

You have a how to in maintenance section

sjeden · « **Reply #2 on:** 30 November 2009, 13:59:07 »

thats bits only for the power, how about for running the audio cables?

my sub has an inbuilt amp prebuilt onto the box

mathewst · « **Reply #3 on:** 30 November 2009, 14:37:20 »

What's the difference??
You run the cables for amp signal the same way, except the front part which would probably be best to run behind glovebox

sjeden · « **Reply #4 on:** 30 November 2009, 14:38:28 »

does the glovebox come out so you can get behind it?

mathewst · « **Reply #5 on:** 30 November 2009, 15:00:43 »

You also have the how to called "replacing glovebox handle" in maintenance section so check that out

News:

Author Topic: Aftermarket HU && AMP Wiring. (Read 1187 times)

sjeden

Aftermarket HU && AMP Wiring.

mathewst

Re: Aftermarket HU && AMP Wiring.

sjeden

Re: Aftermarket HU && AMP Wiring.

mathewst

Re: Aftermarket HU && AMP Wiring.

sjeden

Re: Aftermarket HU && AMP Wiring.

mathewst

Re: Aftermarket HU && AMP Wiring.