Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Master cylinder compatibility.  (Read 633 times)

0 Members and 1 Guest are viewing this topic.

albitz

  • Guest
Master cylinder compatibility.
« on: 21 November 2011, 22:11:53 »
Star Whites needs a master cylinder urgently, as per this wanted thread. I have one but just want to be certain its suitable so I can send it off to him asap. Can anyone confirm please ? Tia.  :y
http://www.omegaowners.com/forum/index.php?topic=96054.new#new
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Master cylinder compatibility.
« Reply #1 on: 21 November 2011, 22:32:32 »
Read my post in your link :P As long as bore size (cast numbers) is the same it`ll be OK
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

2woody

  • Omega Baron
  • *****
  • Offline Offline
  • Northumberland
  • Posts: 2374
    • View Profile
Re: Master cylinder compatibility.
« Reply #2 on: 22 November 2011, 14:31:44 »
there are two master cylinders fitted to Omega B

The first type is for front/rear split brakes. 25mm front circuit bore, 20mm rear circuit bore - numbers which are cast into the housing of the cylinder.

The second type is for the later diagonal split brakes, 25mm front bore, 25mm rear bore. This type also has a different servo.

Change point about 1996
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.019 seconds with 17 queries.