Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 2 [3]  All   Go Down

Author Topic: Drive/shake  (Read 2912 times)

0 Members and 1 Guest are viewing this topic.

omega3000

  • Guest
Re: Drive/shake
« Reply #30 on: 04 February 2012, 14:49:33 »

i thought if the diss pack was on its way out you tend to loose 2 cylinders. sure ive been told that.

Dont know about that ? The car is def not running on 4 cyl ...i can drive the car slowly and it sounds ok its just when i accelerate say more than 30 mph its a problem .
Logged

omega3000

  • Guest
Re: Drive/shake
« Reply #31 on: 04 February 2012, 17:44:26 »

Passenger side rear spark plug removal ....what can i say  >:( >:( >:(
After a long day i have managed to replace all the spark plugs , the rear passenger one was the toughest to remove and looking at the plug looks like its never been changed .


My question now is : how on earth can i access the diss pack , i can just about feel where it is but cant see whats holding it in let alone reach it ??? ??
Logged

dan-eboy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Sussex
  • Posts: 86
    • Omega 2.5 V6, tourer
    • View Profile
Re: Drive/shake
« Reply #32 on: 04 February 2012, 22:22:27 »

I think the dis-pack not working- 2 cylinders could be correct as i think it works in 3 sets of 2 (1/4, 2/5, 3/6)
As for checking the leads you can pull them off while cars running and listen for change in engine noise and look for spark jumping- no change or spark=no good.  Then you can swap that lead for one you know works and if still no different then dis pack prob gone/ leads prob ok.  Hope this and my PM's help.
Logged

omega3000

  • Guest
Re: Drive/shake
« Reply #33 on: 04 February 2012, 22:26:48 »

Thanks dan , great help and your PMs  :y
Ill do this tomorrow if i can find some more plasters  ::) :y
Logged

dan-eboy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Sussex
  • Posts: 86
    • Omega 2.5 V6, tourer
    • View Profile
Re: Drive/shake
« Reply #34 on: 04 February 2012, 22:42:46 »

Thanks dan , great help and your PMs  :y
Ill do this tomorrow if i can find some more plasters  ::) :y

LOL!
Logged

omega3000

  • Guest
Re: Drive/shake
« Reply #35 on: 04 February 2012, 22:47:24 »

Im finding it challenging thats for sure , no easy way to get to the diss pack as ive found out unless you use the vx way  :-X
Hopefully when i have done the check on the leads the plugs were the problem but at least ill know whats next  :y
Logged

dan-eboy

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Sussex
  • Posts: 86
    • Omega 2.5 V6, tourer
    • View Profile
Re: Drive/shake
« Reply #36 on: 04 February 2012, 22:52:02 »

Yeah i was up on the engine, 1 knee on the battery and 1 on the air intakes, does your back in pretty quick too!
Good luck with it , hope you have more luck than i have!
Logged

omega3000

  • Guest
Re: Drive/shake
« Reply #37 on: 04 February 2012, 23:03:14 »

Speaking to a mechanic "non vx" and he said yep common omega problem diss packs done loads of them , im guessing cos they use pattern parts that dont last long  ::) Even he said good luck with that and keep plenty of plasters handy . One job im sure i wont forget in a hurry but will be wiser to do next time  :y
Logged
Pages: 1 2 [3]  All   Go Up
 

Page created in 0.024 seconds with 17 queries.