Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: nackered wiring  (Read 955 times)

0 Members and 1 Guest are viewing this topic.

scottambrose

  • Guest
nackered wiring
« on: 27 September 2012, 08:19:44 »

my sisters old n reg mondeo v6 was running sluggishly so i took a look and nearly all the wires to the coil pack, ecu, throttle body, egr valve etc etc had cracked and in some were just bare wires even the injector rail wires. i taped as amny up as possible but am i right in thinking thats not got a hope in hell of ever passing another mot?
Logged

Martian

  • Guest
Re: nackered wiring
« Reply #1 on: 27 September 2012, 09:01:01 »

Vehicle wiring is not part of the MOT test
Logged

05omegav6

  • Guest
Re: nackered wiring
« Reply #2 on: 27 September 2012, 10:23:58 »

Unless you really want her to get another car :-\, in which case, yes it's doomed and she needs to get shot really soon ;D

Seriously though, I believe it is only a real concern if it touches anything that moves like the aux belt, or anything exceptionally hot like the exhaust, obvious bare wires are likely to be frowned on as well. :y
« Last Edit: 27 September 2012, 10:26:02 by taxi al »
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34012
  • Git!
    • View Profile
Re: nackered wiring
« Reply #3 on: 27 September 2012, 11:02:30 »

Seeing this a lot on mid to late 90's Fords, a common issue particularly on the engine looms.

It often results in a scrap car and if you go to the breakers for a new loom all you will find is vehicles with the same issue.

Also seena  few go up in smoke due to it.

And yes, it is an issue as the engine vibrations results in shorting wires!
Logged

jonnyboyws6

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • grimsby
  • Posts: 310
    • View Profile
Re: nackered wiring
« Reply #4 on: 27 September 2012, 11:03:42 »

When you say sluggish, does the performance have an extra kick around 4000rpm? If not the IMRC is probably not working. Similar thing to the multi ram on an Omega V6 but a lot less reliable.
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: nackered wiring
« Reply #5 on: 27 September 2012, 11:18:14 »

Mate of mine has a couple of Scorpio Ultimas where the looms have disintegrated. Wiring loom on those runs down the centre of the "V" and down the top of the auto gearbox apparently. He reckons engine and box out job to replace it and currently both engine and gearbox electrics are screwed meaning an otherwise decent car (if you like that sort of thing!) is completely immobile pending a lot of rewiring work.
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: nackered wiring
« Reply #6 on: 27 September 2012, 11:25:36 »

Seeing this a lot on mid to late 90's Fords, a common issue particularly on the engine looms. ....

and earlier 90s Vauxhalls  ;) ;). Crap wiring, going brittle etc, was the reason many Senators/Carltons, especially where extra relays etc were put into the start inhibit loom for alarms, wouldn't start on the key ...... just not enough voltage by the time it got to the starter.
Logged

henryd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • west cornwall
  • Posts: 8806
  • VW Touareg R5 tdi Auto
    • View Profile
Re: nackered wiring
« Reply #7 on: 27 September 2012, 11:42:16 »

Some of the older Merc's suffer from this problem too :-X
Logged
other rides 
  mk3 Volvo v70 2.0 Diesel ,Citroen C2, Pug 306 cabriolet
  Sterling elite trekker pikey wagon

scottambrose

  • Guest
Re: nackered wiring
« Reply #8 on: 27 September 2012, 11:46:01 »

id say the sluggishness is a wiring problem as it drove great after i changed the plugs on sunday then she says yesterday it was missing and sluggish, the wring loom for the coil pack is shot so could be that shorting out
Logged
Pages: [1]   Go Up
 

Page created in 0.013 seconds with 17 queries.