Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: 1 [2]  All   Go Down

Author Topic: hesitation underpart and full throttle  (Read 2251 times)

0 Members and 1 Guest are viewing this topic.

RobseyMV6

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • west sussex
  • Posts: 743
    • View Profile
Re: hesitation underpart and full throttle
« Reply #15 on: 04 March 2013, 20:44:30 »

Used all plod loom so you have the manual loom Russ.
Logged

bigtow

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • rochester kent
  • Posts: 363
  • 2001 3.2 MV6 manual was 2.6 auto
    • x type 2,0d estate
    • View Profile
Re: hesitation underpart and full throttle
« Reply #16 on: 04 March 2013, 21:28:50 »

ahh thanks rob i will have to have another search for the cruise wires again or is the loom under the dash still the auto loom ?

had a mate put his snap on code reader on the car today only faults that came up were clutch switch fault ( well that will be because its not plugged in ) both cats low efficiency . and 0001 maf something or other didnt get chance to copy it down fully before he cleared the faults   :-\ no mis fires were recorded ?
Logged
2001 MV6 3.2 manual been converted from 2.6 auto
Pages: 1 [2]  All   Go Up
 

Page created in 0.01 seconds with 17 queries.