Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: pins for facelift ecu  (Read 3816 times)

0 Members and 1 Guest are viewing this topic.

bigtow

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • rochester kent
  • Posts: 363
  • 2001 3.2 MV6 manual was 2.6 auto
    • x type 2,0d estate
    • View Profile
Re: pins for facelift ecu
« Reply #15 on: 04 March 2013, 21:34:33 »
Quote from: TheBoy on 04 March 2013, 18:54:45
I cannot recommend installing cruise without the clutch switch, doing so would be a bit brain dead.

So you need to Tech2 the ECU to manual, and install the wiring and fit the clutch switch.

the ecu is a manual one .this is why i want the pins to install the correct wiring
Logged
2001 MV6 3.2 manual been converted from 2.6 auto

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107023
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: pins for facelift ecu
« Reply #16 on: 05 March 2013, 18:19:22 »
Logged
Grumpy old man

bigtow

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • rochester kent
  • Posts: 363
  • 2001 3.2 MV6 manual was 2.6 auto
    • x type 2,0d estate
    • View Profile
Re: pins for facelift ecu
« Reply #17 on: 05 March 2013, 18:21:37 »
That's it I just need a couple of unused ones
Logged
2001 MV6 3.2 manual been converted from 2.6 auto

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: pins for facelift ecu
« Reply #18 on: 06 March 2013, 13:04:11 »
If you get hold of a 2nd hand connector you might find you can extract a pin with a length of wire attached and then insert it into yours, assuming the unused holes in the connector receptacle are there and haven't been plugged with something.
« Last Edit: 06 March 2013, 13:07:36 by Kevin Wood »
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11443
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: pins for facelift ecu
« Reply #19 on: 14 March 2013, 21:51:33 »
Ive got some tools somewhere for removing and installing pins for RS232 type connecters and Im also scrapping a Mig at the moment, will have a look and see if I can get some pins out from the loom this weekend if I get time.
Logged

bigtow

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • rochester kent
  • Posts: 363
  • 2001 3.2 MV6 manual was 2.6 auto
    • x type 2,0d estate
    • View Profile
Re: pins for facelift ecu
« Reply #20 on: 15 March 2013, 13:49:11 »
thank you  :y
Logged
2001 MV6 3.2 manual been converted from 2.6 auto
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.009 seconds with 17 queries.