Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Many Thanks too.........  (Read 582 times)

0 Members and 1 Guest are viewing this topic.

Omega_Dan

  • Guest
Many Thanks too.........
« on: 14 October 2010, 16:10:06 »
ElitePete! came to me today and replaced cambelt and waterpump, did oil and filter change and changed my coolant and what a job he did! feel so much better its done now! Saved me a fortune over dealer prices and standard of work is brilliant! Pete ill be over in a few weeks for my new discs and pads so get the kettle on ready :y cheers again!
« Last Edit: 14 October 2010, 16:10:30 by Omega_Dan »
Logged

Welung666

  • Guest
Re: Many Thanks too.........
« Reply #1 on: 14 October 2010, 17:08:19 »
About time he did some work ;) :P ;D ;D

Well done both and hope to see you later Dan :y
Logged

Welung666

  • Guest
Re: Many Thanks too.........
« Reply #2 on: 14 October 2010, 20:38:53 »
Well to add my thanks... to Dan for meeting me with his old cam belt kit and to Pete for boxing it back up for me. I'd have used one of the old ones I had here but I was made to tidy the garage ;D ;D

I can fit this on the MV6 tomorrow so I can see if I get any resistance turning it over by hand following the top belt follower bolt failing. This caused the tension to drop off and the crank to strip 10 or 11 teeth off the original belt. I'm 99% certain now it has taken valves but wanted to check properly.

Thanks guys and see you both on the 7th :y
Logged

Omega_Dan

  • Guest
Re: Many Thanks too.........
« Reply #3 on: 15 October 2010, 08:55:23 »
your welcome mate! :y
Logged

Elite Pete

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chester
  • Posts: 19580
  • My spider senses are tingling
    • Audi SQ5 GSX1400
    • View Profile
Re: Many Thanks too.........
« Reply #4 on: 16 October 2010, 09:02:25 »
Cheers Dan, I'll even bet the bacon butties on seeing as you made me some, and nice they were too :y

 Good luck with the belt Lee ;)
Logged
Retired

Welung666

  • Guest
Re: Many Thanks too.........
« Reply #5 on: 16 October 2010, 09:45:33 »
Quote
Cheers Dan, I'll even bet the bacon butties on seeing as you made me some, and nice they were too :y

 Good luck with the belt Lee ;)

Belt was fine, more than can be set for the valves it's moving :(
Logged

Omega_Dan

  • Guest
Re: Many Thanks too.........
« Reply #6 on: 16 October 2010, 21:30:33 »
least they were some use to you mate. look forward to it pete
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 17 queries.