Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dbug]

1998 Elite 2.5V6 auto

Error message on display - check low beam fld/vision

To do with HIDs?  Levelling mechanism/sensors? What exactly?

Help plse

[Andy B]

1998 Elite 2.5V6 auto

Error message on display - check low beam fld/vision

To do with HIDs?  Levelling mechanism/sensors? What exactly?

Help plse

It could be the link arm has popped off the level switch on the front near side wishbone (usually this one) or the rear nearside radius arm. Or course it could be the sensor(s) is/are rubber ducked. Or ..... the level motor in the headlamp not moving the reflector properly. Tech II really to determine exactly where the fault is.

[dbug]

1998 Elite 2.5V6 auto

Error message on display - check low beam fld/vision

To do with HIDs?  Levelling mechanism/sensors? What exactly?

Help plse

It could be the link arm has popped off the level switch on the front near side wishbone (usually this one) or the rear nearside radius arm. Or course it could be the sensor(s) is/are rubber ducked. Or ..... the level motor in the headlamp not moving the reflector properly. Tech II really to determine exactly where the fault is.

Thanx - will check level switches 1st - when it is light.  Doesn't seem to affect HID beams!! - should it?

[TheBoy]

if the lights are now low, I would suspect the sensors. If they are normal, I would suspect the servos.