Topic: Rear adjuster for geometry setting ? (Read 736 times)

bigdods · « **on:** 20 May 2008, 16:44:15 »

I did a quick search but couldnt find anything helpful...so...

Im off to WIM next week for a full Geometry set up and new tyres to be fitted. After a chat on the phone they suggested I spray liberal amounts of WD40 on the rear adjusters between now and when it goes in next week. Can anyone post a piccy of what I should spray ?

Cheers

Dodsy

Richard A · « **Reply #1 on:** 20 May 2008, 17:31:38 »

Anything on the rear suspension with a 'screw thread' just to be sure.

The important two links are inline but to the rear of bottom rear wishbone.
regards
richard a

Mike Collins · « **Reply #2 on:** 20 May 2008, 17:38:41 »

I would suggest something like Plus Gas is better penetrating.

TheBoy · « **Reply #3 on:** 20 May 2008, 21:40:16 »

WD40 is fine for this, as it has time to work in.

Only place is the rear track rods, spray on threads, the locknuts, and in the little slits in the rod. May as well do front trackrods as well...

News:

Author Topic: Rear adjuster for geometry setting ? (Read 736 times)

bigdods

Rear adjuster for geometry setting ?

Richard A

Re: Rear adjuster for geometry setting ?

Mike Collins

Re: Rear adjuster for geometry setting ?

TheBoy

Re: Rear adjuster for geometry setting ?