Topic: Ignition switch problem (Read 1045 times)

LFF64 · « **on:** 13 February 2009, 12:30:47 »

I have a problem with the ignition switch again last year I had to replace the ignition switch barrel as the end had sheared off and was not turning the contact block
I went to leave work yesterday and the same thing has happened again its sheared off in the same place .
The lock was not tight or anything is it just bad luck or something more sinister .
Any ideas anyone . The one I fitted was genuine part and brand new if that makes any difference

andyc · « **Reply #1 on:** 13 February 2009, 16:44:44 »

If you have had the part under 12 months then first port of call would be back to the dealer you brought the part from.

if under 12 months it should be under warranty but you will needn the orginal invoice

Andy

LFF64 · « **Reply #2 on:** 13 February 2009, 17:42:39 »

Thanks Andy I have been over to see them since posting and they are willing to replace it under warranty , I found out the invoice and was suprised to find its nearlly 10 months old . Time flies by

LFF64 · « **Reply #3 on:** 17 February 2009, 20:44:37 »

Got the new ignition switch barrel today and fitted it , It was replaced under warranty no questions . Not all dealers are bad

News:

Author Topic: Ignition switch problem (Read 1045 times)

LFF64

Ignition switch problem

andyc

Re: Ignition switch problem

LFF64

Re: Ignition switch problem

LFF64

Re: Ignition switch problem