Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[atkinsonomega]

Hi, I've had a few running problems with my MV6 as it's been cutting out, as I couldn't figure out the paper clip test I disconnected the MAF sensor and hey presto! it didn't cut out anymore. As when it's disconnected it doesn't cut out and when it's connected it does this must be the fault so I'm looking for a cheap maf sensor if anyone has one going it would be a great help, many thanks in advance.

[feeutfo]

No first hand experience with this but have seen other members mention
Direct from Bosch

And via google
Autovaux
Vauxcentre
As you probably know GM are a bit steep.
Or a breakers, a couple on here, good lads they are too. Markey Mark and Mutant cav among others.
Hope helps a little. :-)

[BettyBlu]

Failing that they have them here (I'm guessing this is the same part?)

http://www.vauxhallworldparts.com/partsearch/partdetail.php?linkid=7773&partid=482

[markey mark]

i have a good second hand tested one here mate  

[atkinsonomega]

How much you after for it?

[webby23]

Recently bought a replacement maf sensor (Only) for our 2.6..........bloke on ebay selling the part without the pipework for £30 but accepted an offer of £22.50........

Look on ebay mate if you have no luck on here