Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Robski]

Following the weekend at York,my air leak was diagnosed by Marks DTM Calib as drawing air at the inlet manifold,it was stripped down and below the inlet manifold is a black plastic part when this was removed the gaskets on the underside were in a right state,unfortunatley at the meet could only get hold of one gasket.The thing I need now is to get the part number for these gaskets so that when I go to VX they know what gasket Im on about.All help is much appreciated thanks

[feeutfo]

i got these from vx for my old cdx. They will be able to find them via epc with or without your reg. Although its not unwise to have p no. if anyone obliges.

[Robski]

Does anybody have this part number please  :-? :-?

[Darth Loo-knee]

Like said Rob when you go to Vauxhall they will have the part on screen then you can point out what it is you want  

[HerefordElite]

are we talking about the 'spectacle" seals:
•Gasket, Inlet to Inlet bridge: 90501653, 3 off :-?

as seen here:

http://www.omegaowners.com/forum/YaBB.pl?num=1152564281

[Robski]

On the underneath of where you can see the "spectacle" seals.

[MutantCav]

I have a 3.0 lower inlet or 2 with good seals here I could send special delivery??

[TheBoy]

I have a 3.0 lower inlet or 2 with good seals here I could send special delivery??

In this case I would recommend brand new seals. I know they can often be reused, but going by the problems.....

[Robski]

I have a 3.0 lower inlet or 2 with good seals here I could send special delivery??

In this case I would recommend brand new seals. I know they can often be reused, but going by the problems.....

Thanks mutant cav and TB,I've got 2 new gaskets from VX just waiting for Pinky and .......Pinky(LK&EP) to arrive should be here soon,so will let you know how it goes with new gaskets on