Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Help with a fault code...  (Read 776 times)

0 Members and 1 Guest are viewing this topic.

jim351

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bognor Regis, West Sussex
  • Posts: 125
    • View Profile
Help with a fault code...
« on: 04 June 2009, 20:28:23 »
Hi, i have just scanned my 2.6 and code P1625 has come up, can anyone tell me what it means? also the fuel trim code on both banks comes up too, it sounds like the drivers side Cat has broken up and part of it is in the middle box would this cause the fuel trim codes?  after running the car up the road for about 20 mile the Exhaust emission light comes on too...
« Last Edit: 04 June 2009, 22:39:49 by jim351 »
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: Help with a fault code...
« Reply #1 on: 04 June 2009, 20:32:02 »
Quote
Hi, i have just scanned my 2.6 and code P1625 has come up, can anyone tell me what it means? also the fuel trim code on both banks comes up too, it sounds like the drivers side Cat has broken up and part of it is in the middle box would this cause the fuel trim codes? 

Fault codes for 2.6 are here http://www.omegaowners.com/forum/YaBB.pl?num=1220619696 but i can't see 1625  :-/
Logged

jim351

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bognor Regis, West Sussex
  • Posts: 125
    • View Profile
Re: Help with a fault code...
« Reply #2 on: 04 June 2009, 20:35:21 »
yeah i look at that and was surprised not to see it there, someone must know
Logged

jim351

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bognor Regis, West Sussex
  • Posts: 125
    • View Profile
Re: Help with a fault code...
« Reply #3 on: 05 June 2009, 08:15:04 »
any idea's anyone?  :)
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107031
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Help with a fault code...
« Reply #4 on: 05 June 2009, 08:41:47 »
is it an auto? If so, get the autobox codes read ;)
Logged
Grumpy old man

jim351

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Bognor Regis, West Sussex
  • Posts: 125
    • View Profile
Re: Help with a fault code...
« Reply #5 on: 05 June 2009, 23:31:24 »
yeah its an auto, i take it tech2 sorts it out, i have access to the software but dont have the cable, do the cables you can get off flebay work or are they a waste of money?
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.