Topic: 3.2 oil filter (Read 1716 times)

kcl · « **Reply #15 on:** 18 August 2009, 10:33:00 »

24mm ring spanner is the tool for this. I found that there is not enough room to put a 1/2" drive socket on it, and my 3/8" drive set does not include 24 mm socket so I've been using the ring spanner without any problems. When installing a new filter I always use the 3/8" drive and always torque it ups to 15Nm

ferrari jason · « **Reply #16 on:** 18 August 2009, 11:42:07 »

Thanks for al the advice and sizes ive gone through my vast collection of spaners and sockets and guess what i aint got LOL . Looks like im off to the local car boot sale on sunday for a good rummage .(i`m too tight to buy a new one lol )

unlucky mark mv6 · « **Reply #17 on:** 19 August 2009, 20:11:43 »

Quote

it is 24mm from memory. Don't be tempted to use a 3/8 drive wrench in the cap, it will break if its been over titghtend

That is exactly the mistake i made.

News:

Author Topic: 3.2 oil filter (Read 1716 times)

kcl

Re: 3.2 oil filter

ferrari jason

Re: 3.2 oil filter

unlucky mark mv6

Re: 3.2 oil filter