Topic: Where does this tube attach? MV6 (Read 620 times)

bbacon · « **on:** 08 October 2009, 02:46:37 »

Alright Lads, I have done the oil cooler fix and upon completion I have an extra hose/tube without a place. It is in the location of the rear plenum 4 where the "y" hose and the other two breather hoses attach. It is rather hard black plastic like tubing as opposed to rubber hose. It runs down the back of the engine and along the top of the transmission. Where the @#$()

does it attach so I can put this job to bed.
Thanks in advance,

BB

CaptainZok · « **Reply #1 on:** 08 October 2009, 04:09:31 »

Nowhere, it's a breather for the gearbox usually held in place with a cable tie.

Marks DTM Calib · « **Reply #2 on:** 08 October 2009, 11:20:01 »

Yes, just vents to atmosphere......should come up behind the engine, loop through 180 degrees and point down again.

bbacon · « **Reply #3 on:** 09 October 2009, 02:38:01 »

Very nice, guess the jobs done.
Cheers and many thanks.

News:

Author Topic: Where does this tube attach? MV6 (Read 620 times)

bbacon

Where does this tube attach? MV6

CaptainZok

Re: Where does this tube attach? MV6

Marks DTM Calib

Re: Where does this tube attach? MV6

bbacon

Re: Where does this tube attach? MV6