Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[megaomega123]

Does anybody know where I can get, or a good alternative, vac tube?
Due to poor routing and mounting my aux belt has warmed one in half 

[tunnie]

PM Darth-Loo-Knee or Elite Pete 

[megaomega123]

PM Darth-Loo-Knee or Elite Pete 

Cheers Tunnie  Anything that will suffice for now, as I have no multiram and could do with a bodge fix until I get the right stuff.

[tunnie]

PM Darth-Loo-Knee or Elite Pete 

Cheers Tunnie  Anything that will suffice for now, as I have no multiram and could do with a bodge fix until I get the right stuff.

Not worth bodging, Loo-Knee has broken fair few Omegas recently, so hopefully has some Vac pipes about. Otherwise check with the other breakers 

[megaomega123]

No probs. I'll pm both now. Thanks again 

[Debs.]

Does anybody know where I can get, or a good alternative, vac tube?
Due to poor routing and mounting my aux belt has warmed one in half 

If you need a repair ASAP; then, motor factors often have a choice of various diameters of thick-walled rubber hose with which you could make a join of the existing (broken/worn-through) plastic length.....you shouldn`t need any clamps on the repair piece, as long as the rubber portion is a tight sliding fit over the outside of the old plastic pipe.

[Kevin Wood]

Does anybody know where I can get, or a good alternative, vac tube?
Due to poor routing and mounting my aux belt has warmed one in half 

If you need a repair ASAP; then, motor factors often have a choice of various diameters of thick-walled rubber hose with which you could make a join of the existing (broken/worn-through) plastic length.....you shouldn`t need any clamps on the repair piece, as long as the rubber portion is a tight sliding fit over the outside of the old plastic pipe.

Agreed. I have repaired them like this before. Just take a bit of the plastic pipe to a decent motor factors and find some rubber hose that is a nice tight fit.

Kevin

[dbr]

Does anybody know where I can get, or a good alternative, vac tube?
Due to poor routing and mounting my aux belt has warmed one in half 

+
+ some sealant. works well

If you need a repair ASAP; then, motor factors often have a choice of various diameters of thick-walled rubber hose with which you could make a join of the existing (broken/worn-through) plastic length.....you shouldn`t need any clamps on the repair piece, as long as the rubber portion is a tight sliding fit over the outside of the old plastic pipe.

Agreed. I have repaired them like this before. Just take a bit of the plastic pipe to a decent motor factors and find some rubber hose that is a nice tight fit.

Kevin

[megaomega123]

Thanks everyone, have just purchased a good length off mutantcav.
Will be routed well away from aux belt ha!!