Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bumbazor]

I have a mini-facelift car and have fitted a facelift MV6 bumper (did it ages ago). However, I have not yet got the facelift metal support. This is because I have a large washer bottle (windscreen and headlights) inside the current bumper support.

My question is; if I get a facelift bumper support, what implications would that have for my current washer bottle and neck? Would I have to get a washer bottle for the facelift support or could I use what I have now?

Thanks

[RobG]

AFAIK washer bottles are same across the range I think the only physical difference is the addition of the pump for the headlight washers where without there is a bung

[Bumbazor]

Ok so all I might have to do is modify the filler neck. That's not too bad

[Andy B]

AFAIK washer bottles are same across the range I think the only physical difference is the addition of the pump for the headlight washers where without there is a bung

I understood that there were 2 different sizes. One for cars without headlight washers & another bigger bottle for those with.  :-/

[Bumbazor]

... I have a large washer bottle (windscreen and headlights)...

[Jim]

It should only be the filler neck you have to remove, as the pre-facelift has an extented neck to reach the slam panel.

[Bumbazor]

Ok, thanks.