Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: 2 different drive shafts??  (Read 559 times)

0 Members and 1 Guest are viewing this topic.

weasel

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • norfolk
  • Posts: 40
    • View Profile
2 different drive shafts??
« on: 29 June 2010, 18:33:32 »

Hi, i need a bit of advice on driveshafts, or outer cv joints to be precise, and i hope this makes sense....
I changed my diff a couple of months back, and the new diff had shafts already in it, so i intended on using these so i didnt have to pull the shafts out.
passengers side bolted onto hub fine, but the drivers side was completely differnet, the bolts were different spaces apart and it was a different shape.

So obviosly at some point the rear hub and drive shaft have been changed on my car, because the funny pattern on the end of outer CV joint wouldnt fit into hub, so i ended up using my original shaft.
Any one have any ideas as to what this rear hub and shaft may be off (2 litre possibly) because all other shafts/hubs ive come across 2.5 v6 auto and manual have been like the passengers side one?
Any help would be good
Logged
To find the limit, first you have to go past it...
Pages: [1]   Go Up
 

Page created in 0.011 seconds with 17 queries.