Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 [2]  All   Go Down

Author Topic: Taking a guess, is it dead?  (Read 2601 times)

0 Members and 1 Guest are viewing this topic.

Teebee

  • Intermediate Member
  • ***
  • Offline Offline
  • Slough
  • Posts: 297
    • View Profile
Re: Taking a guess, is it dead?
« Reply #15 on: 13 September 2010, 10:08:42 »
Sorry TB further up I was referring to the ABS ECU I just didn't mention it again in the last post.
Logged

Teebee

  • Intermediate Member
  • ***
  • Offline Offline
  • Slough
  • Posts: 297
    • View Profile
Re: Taking a guess, is it dead?
« Reply #16 on: 13 September 2010, 16:01:05 »
Quote
If the coolant servicing has been historically poor, I've seen oil cooler plates corrode badly, which normally leads to a massive leak.
Well i've stripped it down to the inlet manifold and all the pipes into the bridge area are dry and intact, if I add water you can see it run both directions under the manifold so looking like your guess is right and the oil cooler failed. I need a proper torx set to get lower as a few bolts are solid but I will get there for my own interest.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107322
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Taking a guess, is it dead?
« Reply #17 on: 13 September 2010, 18:15:38 »
Quote
Sorry TB further up I was referring to the ABS ECU I just didn't mention it again in the last post.
Opps  :-[

Are both cars pre 1998 or both post 1998?  The ABS hydraulically changed with minifacelift, going from 3 channel to 4 channel.

If the answer to that is yes, then as long as they are both from same engine adn gearbox setup, should be fine.
Logged
Grumpy old man
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.