Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[kcl]

For a start, going to the "marbel-counter" is not an option for a reason. 

Does anyone have the dimensions for oil cooler O-rings and coolant bridge seals? I know the dowtys for cooler are 16,2x19,9 mm and the banjo bolts should be 16x1,5x28 with two 7,5mm holes but what size are the O-rings? And the coolant bridge seals?

Also, the grey goo: is there a Loctite product that is the same or can be used?

[mantahatch]

I first used the original seals sourced from Vauxhall dealer on the coolant bridge and oil cooler. But for some reason I had a leak on the oil cooler banjo bolts. So I used dowty type seals on both coolant bridhe and oil cooler.

I have the O rings at home and can measure them this evening. ButI am sure someone will no the measurements before this evening.

[kcl]

That would be very helpful from you, thanks. I have usit -seals available (brand for dowty-type washers) as well as o-rings, hence the question.

Anyone for the grey sealant? What "commercial" product is the same?

[Martin_1962]

Can Andy parts man post them to you?

[mantahatch]

Just got in from work. bit awkward to measure but 25mm to 26mm outside diameter. 2mm thickness and 22mm internal diameter.

I have the standard O rng kit from RS Components and there is not an equivilant in the kit. But I am sure they would be available.