Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: V6 Faults codes 19 & 21  (Read 724 times)

0 Members and 1 Guest are viewing this topic.

Alex W

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 290
    • 2000W Facelift 2.5V6 Elit
    • View Profile
V6 Faults codes 19 & 21
« on: 13 July 2011, 12:07:57 »
I replaced my crank sensor after getting code 19 as advised in topic below "Misfire Fault 19". While I was at it, I had the plenum off and cleaned the breathers and replaced the HBV I also changed the fuel filter because it was long overdue.

Reassembled and made to go on a test drive  but immediately had "Automatic Transmission" warning car didn't want to move. Stopped and paperclipped. I now have codes 19 & 21.

I am assuming that I have done something stupid, can anyone point me in the right direction?

Thanks in advance.
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: V6 Faults codes 19 & 21
« Reply #1 on: 13 July 2011, 12:14:23 »
Make sure the TPS is connected firmly on the throttle bodies
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Alex W

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 290
    • 2000W Facelift 2.5V6 Elit
    • View Profile
Re: V6 Faults codes 19 & 21
« Reply #2 on: 13 July 2011, 12:23:13 »
I had left the electrical connector to the throttle housing off. Numpty!!!

Auto transmision warinng has cleared now.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: V6 Faults codes 19 & 21
« Reply #3 on: 13 July 2011, 14:05:46 »
Quote
I had left the electrical connector to the throttle housing off. Numpty!!!

Auto transmision warinng has cleared now.

I did that once!  ::) ::) ::)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.