Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[andrew38]

I have a new bumper to fit which has in the pressure washers, I was just going to leave them on not plumbed in but the donnor car has all of the system in place still. I have a CD model 2002 is it straight forward to get the washers operating and if so what bits would I need off of the old car, i.e pump and wiring etc. Many thanks I could not find an FAQ.

[RobG]

I have a new bumper to fit which has in the pressure washers, I was just going to leave them on not plumbed in but the donnor car has all of the system in place still. I have a CD model 2002 is it straight forward to get the washers operating and if so what bits would I need off of the old car, i.e pump and wiring etc. Many thanks I could not find an FAQ.

Washer reservoir with the hosing, use pumps in replacement reservoir, black relay from the front of box near battery. Job done

[andrew38]

Thanks Rob, any wiring I need it must plug into the wiring somewhere from the fuse box?

[RobG]

Nope, all the wiring is on your car. The connector for the headlamp wash pump will be tied to your existing wiring near the sreen wash pump

[andrew38]

Thanks Rob thats good news, nearly as easy as retro fitting cruise control.

[I_want_an_Omega]

You will need the green fuse next to the relay as well 

[RobG]

You will need the green fuse next to the relay as well 

Should be there already

[I_want_an_Omega]

You will need the green fuse next to the relay as well 

Should be there already

Mine wasn't when I did my CD - was a MFL though

[RobG]

My CD F/L had one

[andrew38]

Thanks for the replys covered my bases and asked for the green fuse as well:-)