Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[amba]

Is there an ignition switched 12v+ at the passenger kit panel,that will provide power with key in position 1 and ignition on.
I cannot pull out radio as cage is jammed solid,so need an extra feed wire for accessory,but not permenant 12v,just switched.

[TheBoy]

Is there an ignition switched 12v+ at the passenger kit panel,that will provide power with key in position 1 and ignition on.
I cannot pull out radio as cage is jammed solid,so need an extra feed wire for accessory,but not permenant 12v,just switched.

I think W contact is down there (12v at I, II, and at 0 if the ign has been switched to I and the key hasn't yet been removed).

You'll need to look at the wiring diags to see which on it is though!

[amba]

Thanks TB.....don,t suppose any idea on colour of wire as I had a good poke around and can only find permenant 12v+ .

[TheBoy]

Thanks TB.....don,t suppose any idea on colour of wire as I had a good poke around and can only find permenant 12v+ .

Pin 12 on connector X1. Red.

[amba]

TB...thanks alot...and that is accessable at the passenger kit panel ?

[amba]

Haynes wiring is next to useless...states..".X1.wiring connections"....and thats it,no further details.??and you need a magnifying glass to see the schemetics,so totally useless imho.

[TheBoy]

TB...thanks alot...and that is accessable at the passenger kit panel ?

the x1 connector is behind passenger kick panel.  Not the easiest to connect to.