Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Omega sunroof ecu needs reseting.relearning after batt discon.

move switch to fully open, then press and hold sunroof switch. Then move to close, and press and hold, then to full tilt, press and hold, then close again, press and hold.


Windows too will need resetting

trying to get my head around this not having an Omega . . .

After the battery has been disconnected, the sunroof needs to be reset (understood) and this is done by pressing the switch in determined positions for a determined time (understood)

but the bit I struggle with is that the original post said that the rood did not work / open / close - does this mean that the sunrood ecu will not actually move the roof until its reset, and you are not actually resetting the physical position of the roof?

Correct - sunroof won't do anything until it has relearned endpoints and roof resistance