Topic: help changing car stereo (Read 2385 times)

Jimbob · « **Reply #16 on:** 30 June 2010, 09:05:51 »

right, you need an adaptor for the aerial....couple of quid in any car shop.

you also need to unplug the red and yellow bullet connectors on your new stereo and swap them so red goes to yellow, and yellow to red..
this sorts the memory out and coming on / off with the ignition

same #same# · « **Reply #17 on:** 30 June 2010, 16:07:40 »

Hi again what radio head is it, looks like will need adapter for arial socket, but cannot realy see what the plugs are and wires in pic's,

Dave DND · « **Reply #18 on:** 30 June 2010, 17:51:07 »

Looks like a fairly basic Kenwood to me?

probably does not have steering capability, so installation will be a doddle !!

As previously said, swap over the yellow and red wires on the bullets on the Kenwood loom and plug into the smaller two blocks of teh Vauxhall loom - Ignore the wider bit at the top - not needed for this install.

Aerial connector is one of these

http://www.dndservices.co.uk/pc5-27.html

News:

Author Topic: help changing car stereo (Read 2385 times)

molliemoo060304

Re: help changing car stereo

Jimbob

Re: help changing car stereo

same #same#

Re: help changing car stereo

Dave DND

Re: help changing car stereo