Topic: The dreaded fld vision error (Read 3309 times)

SIR Philbutt · « **Reply #15 on:** 21 July 2013, 14:08:40 »

Well the little arm had popped out of the connector - thanks chris & phil

No dangly bit's though

So now i know i have self adjusting how do i test they are actually adjusting $:-\$

chrisgixer · « **Reply #16 on:** 21 July 2013, 14:12:00 »

If there's is no dash warning don't worry about it. Although first pot hole....

SIR Philbutt · « **Reply #17 on:** 21 July 2013, 14:15:21 »

Quote from: chrisgixer on 21 July 2013, 14:12:00

If there's is no dash warning don't worry about it. Although first pot hole....

and there are plenty of those about at the moment - austerity

at least it's a quick re-fix until I have to replace it

chrisgixer · « **Reply #18 on:** 21 July 2013, 14:22:50 »

One of the breakers here might have a good used one, if its needed.

They where over £50 each when I needed one, and that was years ago. They have gone up considerably since.

hotel21 · « **Reply #19 on:** 21 July 2013, 15:16:34 »

Cable ties are cheap enough though.....

SIR Philbutt · « **Reply #20 on:** 21 July 2013, 15:59:16 »

Quote from: hotel21 on 21 July 2013, 15:16:34

Cable ties are cheap enough though.....

ta - just put some in the car

News:

Author Topic: The dreaded fld vision error (Read 3309 times)

SIR Philbutt

Re: The dreaded fld vision error

chrisgixer

Re: The dreaded fld vision error

SIR Philbutt

Re: The dreaded fld vision error

chrisgixer

Re: The dreaded fld vision error

hotel21

Re: The dreaded fld vision error

SIR Philbutt

Re: The dreaded fld vision error