Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[vauxfan2k]

Just got a pair of these from 2 well known breakers on this site  

Has anyone fitted a set before? I thought they were a straigt swap, but it looks like I have to remove the upper lugs  nearest the fogs, and the hole in the lower lug nearest the fog does not line up with the hole on the steinmetz griles.

I dont want to butcher the bumper if not needed,

Cheers

Steve

[vauxfan2k]

dont all reply at once  

I take it noone else has these fitted to their miggy?

 

[Elite Pete]

Hi Steve, I removed them and from what I saw they looked standard but I must admit I didn't pay too much attention when I was removing them.

[vauxfan2k]

Ill have to whip of one of the grilles off one of th other omega's, maybe there is different variations.

its annoying to be stumped by something so small  

[Seth]

Never heard of them .......

[vauxfan2k]

Finally got these to fit without cutting the tabs off the bumper, but had to drill a second hole in the bottom tab, no big deal.

Looked a bit silly with my meshed grille, so took that off and put the standard irmscher grille back on, looks excellent.

 

[VXL V6]

Finally got these to fit without cutting the tabs off the bumper, but had to drill a second hole in the bottom tab, no big deal.

Looked a bit silly with my meshed grille, so took that off and put the standard irmscher grille back on, looks excellent.

 

Photo required  

[vauxfan2k]

its too dark for a picture as there isnt much light in the garage, and the car is covered, but Here is a pic of the bumper grille fitted.



all the fuzzy light marks are caused by the flash on the phone camera.