Topic: Noise when reversing slowly (Read 696 times)

amba · « **on:** 18 October 2010, 07:28:21 »

For a while now I have got a clunking noise when I touch the footbrake when reversing.

It is only coming from the drives side front and is very noticeable when reversing slowly ,and then touching the brake pedal.Doesn,t do it at all in forward motion ,just back wards.

I have removed road wheel and had a good look but unsure what could be the issue.Pads and discs are less than 5k ,and has only started in the last few weeks...can be felt and heard as a definite clonking sound.

Any ideas guys !

dbug · « **Reply #1 on:** 18 October 2010, 08:30:24 »

Sticky caliper or slides

amba · « **Reply #2 on:** 18 October 2010, 08:38:17 »

Good call,but why only in reverse...have tried to get it to make same noise going forward but none.

Brikhead · « **Reply #3 on:** 18 October 2010, 09:21:27 »

You say the pads were changed recently, in that case it may be worth checking the calliper mounting bolts are still tight, could also be the pads moving slightly...

PhilRich · « **Reply #4 on:** 18 October 2010, 10:41:22 »

Check both pad retaining pins are pushed fully home. I found that the pins supplied with my new pads were shorter than the originals? :-/

News:

Author Topic: Noise when reversing slowly (Read 696 times)

amba

Noise when reversing slowly

dbug

Re: Noise when reversing slowly

amba

Re: Noise when reversing slowly

Brikhead

Re: Noise when reversing slowly

PhilRich

Re: Noise when reversing slowly