Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Multi Ram Check?  (Read 783 times)

0 Members and 1 Guest are viewing this topic.

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Multi Ram Check?
« on: 07 April 2007, 22:19:04 »
I have read Marks posts with the Multi Ram papers but still i am a little confused to what i have to do to check its working properly? EP said something about disconnecting some hose that should hiss to show its working but cant remember which pipe.. I am getting 24.2 mpg going to a fro from work and knockin about so would that suggest its working properly? got 28.7 coming back from Brackley ;D :y
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106818
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Multi Ram Check?
« Reply #1 on: 07 April 2007, 22:20:36 »
Quote
I have read Marks posts with the Multi Ram papers but still i am a little confused to what i have to do to check its working properly? EP said something about disconnecting some hose that should hiss to show its working but cant remember which pipe.. I am getting 24.2 mpg going to a fro from work and knockin about so would that suggest its working properly? got 28.7 coming back from Brackley ;D :y
mpg sounds about right.

Does it feel flat at low revs? or gutless after 4k?  If not, they are probably working ;)
Logged
Grumpy old man

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: Multi Ram Check?
« Reply #2 on: 07 April 2007, 22:30:54 »
Quote
Quote
I have read Marks posts with the Multi Ram papers but still i am a little confused to what i have to do to check its working properly? EP said something about disconnecting some hose that should hiss to show its working but cant remember which pipe.. I am getting 24.2 mpg going to a fro from work and knockin about so would that suggest its working properly? got 28.7 coming back from Brackley ;D :y
mpg sounds about right.

Does it feel flat at low revs? or gutless after 4k?  If not, they are probably working ;)

To be honest Jamie its the fastest car I have ever had, does it feel flat not to me and revs hard past 4K by which time i have my eyes glued in front ;D
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106818
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Multi Ram Check?
« Reply #3 on: 07 April 2007, 22:33:02 »
If front is knackered, low rev pickup is not good....
Logged
Grumpy old man

Aivaras

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 12
    • View Profile
Re: Multi Ram Check?
« Reply #4 on: 26 July 2011, 09:14:05 »
hallo to all.

the multi ram valve on the back of inlet manifold should open on 4100rpm, while other one near radiator opens on 3500rpm.
i have a problem with that on the inlet manifold, it shows no signs of working. it shoud work on idle speed and on 4100rpm as i said. the valve is working when i take off The throttle position sesnor (TPS) and i turn it with my finger, then valve opens, but when i put it back on throttle body, valve is not working again.. could someone explain that strange situation? please help. :-[
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Multi Ram Check?
« Reply #5 on: 26 July 2011, 12:16:11 »
Quote
hallo to all.

the multi ram valve on the back of inlet manifold should open on 4100rpm, while other one near radiator opens on 3500rpm.
i have a problem with that on the inlet manifold, it shows no signs of working. it shoud work on idle speed and on 4100rpm as i said. the valve is working when i take off The throttle position sesnor (TPS) and i turn it with my finger, then valve opens, but when i put it back on throttle body, valve is not working again.. could someone explain that strange situation? please help. :-[


MMM this thread dates from 2007 !!!!!!!!!!!!!!!!!

Not sure if its relevant now  :)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.031 seconds with 22 queries.