Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: joshwyatt on 22 January 2015, 17:07:51

Title: ABS ECU Wanted for 3.0
Post by: joshwyatt on 22 January 2015, 17:07:51
As title please, I need an ABS ECU for a 3.0 auto. As I understand any 2.5 or 3.0 ECU from 1998 onwards will do. But if a 3.0 auto one is available, it'll mean no programming is needed!

Thanks  :y
Title: Re: ABS ECU Wanted for 3.0
Post by: JamesV6CDX on 24 January 2015, 06:43:06
I have one of those on my 1999 v plate breaker, 3.0 auto, has never given any trouble

I can't remove it until Monday though :y
Title: Re: ABS ECU Wanted for 3.0
Post by: TheBoy on 24 January 2015, 09:41:27
Ident needs to match (probably a DX, but check), and then programming needs to match.

I'm currently Tech2-less at the moment, so cannot assist with programming for a couple of weeks.
Title: Re: ABS ECU Wanted for 3.0
Post by: joshwyatt on 24 January 2015, 21:14:16
James - There's no rush, thank you! As Jaime suggests I'll check the ident code and let you know, to see if they match. If so, I'll take yours  :y
Jaime - Thank you, I'll check the ident code!
Title: Re: ABS ECU Wanted for 3.0
Post by: TheBoy on 25 January 2015, 18:53:34
What year is this for? Post 1998?
Title: Re: ABS ECU Wanted for 3.0
Post by: joshwyatt on 26 January 2015, 19:23:26
It's for a 2000 3.0 auto, a car you know well!
Title: Re: ABS ECU Wanted for 3.0
Post by: joshwyatt on 27 January 2015, 15:57:30
I have one of those on my 1999 v plate breaker, 3.0 auto, has never given any trouble

I can't remove it until Monday though :y

James, if yours is a DX we're good to go
Let me know a price and I'll get it all sorted  :y
Title: Re: ABS ECU Wanted for 3.0
Post by: TheBoy on 28 January 2015, 17:57:38
It's for a 2000 3.0 auto, a car you know well!
Oh dear. Still, you'll have fun changing the ECU :)
Title: Re: ABS ECU Wanted for 3.0
Post by: zirk on 29 January 2015, 12:52:45
It's for a 2000 3.0 auto, a car you know well!
Oh dear. Still, you'll have fun changing the ECU :)
Yea, nice little job Josh, relatively easy once you've dismantled half the contents the Engine Bay left hand side of the Engine.  ;)
Title: Re: ABS ECU Wanted for 3.0
Post by: omegod on 29 January 2015, 18:33:22
Battery out , 2 x 13 mm bolts undone then force the bugger upwards , pipes bend a wee bit but straighten out when its pushed back down. Works for me anyway :D
Title: Re: ABS ECU Wanted for 3.0
Post by: Terbs on 29 January 2015, 19:07:55
Did not take anything off when we did my 2.5. Hardest most annoying bit was sussing that the pink clip on the electrical connector had to be pulled towards the inner wing. Comes out about 2" or so.  :y