Omega Owners Forum
Chat Area => General Car Chat => Topic started by: theovaux on 09 January 2012, 14:05:20
-
This post reads like a dear Deirdre for cars!
just after some general "this is what id do advice" as I don't know what to do! sorry for the ramble!
My Omega (3.2 elite) is a perfect car for me. as I don't use it too much.It gets left at the airport car park and the euro star car park for a few days a week, and I don't worry about pops and scratches as it's basically a 10 year old car. But its a 10 year old that's nice drive and drives well.
2010 its had cam belt, exhaust, tyres and service. but just now I've been quoted for lower sump, rocker gaskets (smell of burning) and pinion oil seal. the garage said it'll come to more than the cars worth..
So what do I do?
A. shell out
B. trade/sell on
there aren't newer ones (Id have another one tomorrow if there where) and If I sell it what do I get instead? What's the new Omega. In the US we have the CTS and BLS kind of replacing the cetera but there aren't many over here?
by way of background (its a 03) on 68k and a full history from the Met and Vx dealer
-
This post reads like a dear Deirdre for cars!
just after some general "this is what id do advice" as I don't know what to do! sorry for the ramble!
My Omega (3.2 elite) is a perfect car for me. as I don't use it too much.It gets left at the airport car park and the euro star car park for a few days a week, and I don't worry about pops and scratches as it's basically a 10 year old car. But its a 10 year old that's nice drive and drives well.
2010 its had cam belt, exhaust, tyres and service. but just now I've been quoted for lower sump, rocker gaskets (smell of burning) and pinion oil seal. the garage said it'll come to more than the cars worth..
So what do I do?
A. shell out
B. trade/sell on
there aren't newer ones (Id have another one tomorrow if there where) and If I sell it what do I get instead? What's the new Omega. In the US we have the CTS and BLS kind of replacing the cetera but there aren't many over here?
by way of background (its a 03) on 68k and a full history from the Met and Vx dealer
Talking shite as usual. Send a PM to Daz (Darth Loo-knee) or Elite Pete on here
-
A) DIY
B) get one of the forum based meega specialist mechanics , such as , "Darth loo knee" or "Wellung666" , "Elite Pete" or "JamesV6CDX" to do it for you.... it will be MUCH more cost effective, and almost certainly a better done job...
almost all garages are clueless , incompetent breaktards , with two eyes on your wallet and none on the job....
we're all driving them still because there is bugger all to replace them with that represents a similar quality/price equation
-
Petrol for the next couple of months will probably come to more than the car's worth too - doesn't mean it's a good reason for ditching a car that serves you well. You've spent on the main jobs it's going to need for a good couple of years, and there is no "new Omega" so might as well get one of our mechanics to sort it for sensible money and carry on, IMHO.
-
This post reads like a dear Deirdre for cars!
just after some general "this is what id do advice" as I don't know what to do! sorry for the ramble!
My Omega (3.2 elite) is a perfect car for me. as I don't use it too much.It gets left at the airport car park and the euro star car park for a few days a week, and I don't worry about pops and scratches as it's basically a 10 year old car. But its a 10 year old that's nice drive and drives well.
2010 its had cam belt, exhaust, tyres and service. but just now I've been quoted for lower sump, rocker gaskets (smell of burning) and pinion oil seal. the garage said it'll come to more than the cars worth..
So what do I do?
A. shell out
B. trade/sell on
there aren't newer ones (Id have another one tomorrow if there where) and If I sell it what do I get instead? What's the new Omega. In the US we have the CTS and BLS kind of replacing the cetera but there aren't many over here?
by way of background (its a 03) on 68k and a full history from the Met and Vx dealer
Talking shite as usual. Send a PM to Daz (Darth Loo-knee) or Elite Pete on here
My wife said that the fact he then offered to Buy the car was a clue I should have taken.
Kevin. I guess you do your own maintenance but you might know who/where more locally to you and therefore me (im in Berkshire) I could try.. (I will PM the names above also).
I'd love to try myself but Im only really a 2-3 spanner skill (using the Haynes measure :-))
-
So what do I do?
A. shell out
B. trade/sell on
Keep it :y Sounds like the most of the works been done just as i had done on my last 3.0 then i sold it and regretted it ever since ...
A year down the line and 3 changes of cars and im back where i started with another 3.0 elite :y
-
As said... keep it and take it to Daz (DLK).
I can personally vouch that he is a great mechanic and thoroughly decent chap and will sort your car! :y
-
This post reads like a dear Deirdre for cars!
just after some general "this is what id do advice" as I don't know what to do! sorry for the ramble!
My Omega (3.2 elite) is a perfect car for me. as I don't use it too much.It gets left at the airport car park and the euro star car park for a few days a week, and I don't worry about pops and scratches as it's basically a 10 year old car. But its a 10 year old that's nice drive and drives well.
2010 its had cam belt, exhaust, tyres and service. but just now I've been quoted for lower sump, rocker gaskets (smell of burning) and pinion oil seal. the garage said it'll come to more than the cars worth..
So what do I do?
A. shell out
B. trade/sell on
there aren't newer ones (Id have another one tomorrow if there where) and If I sell it what do I get instead? What's the new Omega. In the US we have the CTS and BLS kind of replacing the cetera but there aren't many over here?
by way of background (its a 03) on 68k and a full history from the Met and Vx dealer
Talking shite as usual. Send a PM to Daz (Darth Loo-knee) or Elite Pete on here
My wife said that the fact he then offered to Buy the car was a clue I should have taken.
Kevin. I guess you do your own maintenance but you might know who/where more locally to you and therefore me (im in Berkshire) I could try.. (I will PM the names above also).
I'd love to try myself but Im only really a 2-3 spanner skill (using the Haynes measure :-))
Cam cover gaskets is probably about a 3.5 spanner job, just follow our guides. Diff pinion seal is a job I've never attempted, but seen it done. Looked fiddly.
Lower sump? why? Oil leak?
Not sure I'm happy with the diagnosis TBH...
-
Lower sump? why? Oil leak?
Not sure I'm happy with the diagnosis TBH...
Yep. Not sure how you'd diagnose a lower sump oil leak if it's leaking down from the cam covers. Garage covering all the options instead of diagnosing properly? ::)
-
Needs someone to have a gander by the sound of it. Even if the lower sump joint is leaking its not that hard to fix. If the alloy part above the lower sump is leaking - between alloy and bottom of the block, it gets quite involved imo.
At the end of the day,if the OP really likes his car, it sounds like it will be worth his while getting it fixed,but doing a bit of homework/ research to have it done properly at a reasonable price. The perrenial problem of folks who drive an older car and want to keep it running.
-
Lower sump? why? Oil leak?
Not sure I'm happy with the diagnosis TBH...
Yep. Not sure how you'd diagnose a lower sump oil leak if it's leaking down from the cam covers. Garage covering all the options instead of diagnosing properly? ::)
I thought that as well,they are thinking do the rocker gaskets and bill for the sump as well >:(
-
Reading through various threads and local mechanics estimates it appears that they're all useless and incompetent.
The guys on here a.) know what they're doing and b.) never rip anyone off.
So as said before get someone on here to do your mechanical jobs.
I go to Daz and he lives in Stoke so it's a 2 hour trip each way! But I'd rather spend money on petrol and a day trip to see a nice guy and have peace of mind rather than spend £65 (I think what Vx charge) for an inspection where, so far as I can tell, they've lifted the bonnet, drank a tea, scratched their nuts, shut it again and collected your £65 and done precisely fek all >:( >:( >:( >:( >:( >:( >:( >:(
Nb. I am sure this doesn't go for all Vx dealers but certainly it does for the ones in my locality!
-
Keep the mig...or you'll regret it ;)
As said before, speak to some of the OOF mechanics, who will look after you and your mig well :y
-
sounds like rocer cover gaskets to me im no maniac but ive just done mine,im in bracknell i can have a look for you.
-
sounds like rocer cover gaskets to me im no maniac but ive just done mine,im in bracknell i can have a look for you.
That'd be great... I'll Message you... Id like to try and do that part myself and then perhaps just get the Pinion seal done somewhere as that looks a bit more involved...
-
sounds like rocer cover gaskets to me im no maniac but ive just done mine,im in bracknell i can have a look for you.
Glad to hear it :D
-
sounds like rocer cover gaskets to me im no maniac but ive just done mine,im in bracknell i can have a look for you.
That'd be great... I'll Message you... Id like to try and do that part myself and then perhaps just get the Pinion seal done somewhere as that looks a bit more involved...
You MUST use genuine GM gaskets. PM andyc for prices (much cheaper than other dealers) ;)
-
Reading through various threads and local mechanics estimates it appears that they're all useless and incompetent.
The guys on here a.) know what they're doing and b.) never rip anyone off.
So as said before get someone on here to do your mechanical jobs.
I go to Daz and he lives in Stoke so it's a 2 hour trip each way! But I'd rather spend money on petrol and a day trip to see a nice guy and have peace of mind rather than spend £65 (I think what Vx charge) for an inspection where, so far as I can tell, they've lifted the bonnet, drank a tea, scratched their nuts, shut it again and collected your £65 and done precisely fek all >:( >:( >:( >:( >:( >:( >:( >:(
Nb. I am sure this doesn't go for all Vx dealers but certainly it does for the ones in my locality!
So do I great chap.Don't go on a Thursday.... the Oatcake shop is closed ;D ;D