Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - CMCE305

Pages: [1]
1
Many thanks to all responded.  didnt have time to work on it so sent it to a automatic gearbox garage and £60.00 later it is back working correctly again.  was exactly as diagnosed.  I just have to change the door lock solenoid now which i got from Omegaspares.com and should all be happy again ;D :D :y :y

2
Thanks i will have a look at it first and then decide what to do  :y

3
i have done this again and got codes 1613, 1612 and 1700.  looks like i have to do the TCM.  is this an easy job or should i get someone to do it for me?  if so is there any members in Manchester area that can do this?

4
Sorry to be so thick.  how do you do the Pedal trick.  i have found one which is press brake and accelarator pedal and turn ignition on to postion 2.  when I do this the EM Light flashes once then pauses then flashes 7 times then pauses, flash once and the 3 times.  how do you interpret this to the fault codes?

5
Omega Electrical and Audio Help / Electrical issues on Omega Elite
« on: 27 December 2012, 09:41:07 »
I am hoping someone can help me with an issue on my Omega Elite which occured yesterday.  I hadnt driven it since Saturday and when I tried to go into it yesterday the dead lock on the drivers door didnt release with the central locking.  I used the key which unlocked it but when i started the car the Workshop light and the traction control light remained lit.  Also the lights on the selector for the gears where flashing and if i selected D the number 3 light was lit.  I switched of the car and turned it back on again and the problem went away. I drove about 15 miles on the motorway and stopped for about 1 hour and when i went to go back in again the same problem occured.  could someone help me as to what the problem could be? 

6
Eventually got this sorted today.  i removed the cover next to the seat and found a plug had come lose.  this plug was between the seat and the door sill amd didnt realise that it was there  so all working correctly and happy ;D :D

7
I have checked the wiring again and there is no supply to the switch.  however according to the manual the fuse is the same for the passengers as the drivers and since the drivers is working it cannot be a fuse.  does the supply come from the driver seat or is it direct from the fuse?

8
I have checked the wiring under the seat and it all looks in order.  there are several plugs under there but i am not sure which is the main supply.  if i unplug a motor and place a 12Vdc supply to it will that be ok or is the motor on a reduced supply?  least it will tel me if the motors are working or not

9
I have just purchased a Omega 2.6 V6 Elite and the passenger seat doesnt work at all.  the heated seat is working but cannot move it up or down, forward or back or tilt the back rest.  i have checked the connections and cannot see any loose connections there but would ike this resolving.  can anyone help me in the right direction please?

Pages: [1]

Page created in 0.011 seconds with 14 queries.