1
Omega General Help / Re: Rear shock - bolt size
« on: 22 February 2011, 17:08:17 »
Thanks for reply to both of you 
- 25 October 2025, 03:29:52
- Welcome, Guest
News:
Please check the Forum Guidelines at the top of the Newbie section
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Omega General Help / Rear shock - bolt size
« on: 22 February 2011, 16:17:09 »
Hello people. Someone know the size of the upper and down bolt at the rear shock on omega saloon? I friend has to shock for sale, it looks like shocks for omega, but I am not sure.
Thanks
Ket
Thanks
Ket
3
Omega General Help / Re: Head light bulb upgrade
« on: 10 September 2010, 14:08:08 »
Omega with linse-light is perfect for change to xenon. It looks like orginal omega with xenon and gives a good light.
4
Omega General Help / Remap to E85 - Opel omega 2,2 16 V
« on: 14 September 2010, 14:04:05 »
Does someone know if its possible to remap my Z22ZE omega engine to E85?
5
Omega General Help / Re: Can you adjust the camber?
« on: 13 August 2010, 11:51:23 »
Yes you can on omega B. Rigt behind brake disk the mcperson-arm is split an fasted with teo bolts. If you slacken this two the wheel will come out. If your car has orginal spring you can take it all the way out. Over time, driving this split will go inside again and tires wil scuff inside again. Hope you understand my engelish (Norwegian Omegaowners here )
)
6
Omega General Help / Re: Removing EGR on 2,2 petrol
« on: 13 August 2010, 13:35:21 »
Thanks both I will try blank it. It will anyway give a cleaner engine, inside of it
I will try blank it. It will anyway give a cleaner engine, inside of it
7
Omega General Help / Re: Removing EGR on 2,2 petrol
« on: 13 August 2010, 13:11:37 »
Have some of you blanked it?
8
Omega General Help / Re: Removing EGR on 2,2 petrol
« on: 13 August 2010, 13:07:40 »
Thanks. I was thinking to blank it. Would I get EML if I blank it?
9
Omega General Help / Re: Removing EGR on 2,2 petrol
« on: 13 August 2010, 12:11:57 »
Thanks. I was looking at the inlet manifoil. Want to try if it increase tho power
10
Omega General Help / Removing EGR on 2,2 petrol
« on: 13 August 2010, 11:55:58 »
I have a 2,2 petrol (Z22XE) and I was thinking removing the EGR valve. But couldnt find it? Someone know if this engine dont have EGR? In partscatalog theres is one for this enging.
Please help
Please help
11
Omega General Help / Re: how many gears ??
« on: 13 August 2010, 12:02:07 »
The 4. step auto has 4 gear, but it has "lock up" in 3. and 4. So if you count it would looks like you have 6
12
Omega General Help / Re: Alarm Keeps Going Off on 3.0 v6 2000 X reg
« on: 13 August 2010, 11:57:59 »
Check sensor under the bonnet. This must maybe be adjust.
KET
KET
13
Omega General Help / Throtle problems - omega 2,0 dti
« on: 24 July 2009, 20:49:23 »
I have some problems on a opel omega 2,0 dti 1998 model. when I drive, and reduce on the trothlepedal, the trothle -pedal will not respond after. The trothle-pedal respond after 30 second - 1 minut. When this happens, it comes "ignition-smell"from engine. I have checked fault - codes and following fault-codes comes:
1) p0100 not present (6) critical system malfunction 1
2) p0105 not present (2) boost pressure sensor circuit low input
Is there someone who has had the same problem and has some experience to share with me?
Sincerely Kenneth
1) p0100 not present (6) critical system malfunction 1
2) p0105 not present (2) boost pressure sensor circuit low input
Is there someone who has had the same problem and has some experience to share with me?
Sincerely Kenneth
14
Newbie Welcome Area / Re: Trothle problems - omega 2,0 dti
« on: 24 July 2009, 20:40:43 »
Hello. Thanks for your answer. where can I find this general-site?
15
Newbie Welcome Area / Trothle problems - omega 2,0 dti
« on: 24 July 2009, 20:35:07 »
I have some problems on a opel omega 2,0 dti 1998 model. when I drive, and reduce on the trothlepedal, the trothle -pedal will not respond after. The trothle-pedal respond after 30 second - 1 minut. When this happens, it comes "ignition-smell"from engine. I have checked fault - codes and following fault-codes comes:
1) p0100 not present (6) critical system malfunction 1
2) p0105 not present (2) boost pressure sensor circuit low input
Is there someone who has had the same problem and has some experience to share with me?
Sincerely Kenneth
1) p0100 not present (6) critical system malfunction 1
2) p0105 not present (2) boost pressure sensor circuit low input
Is there someone who has had the same problem and has some experience to share with me?
Sincerely Kenneth
Pages: [1]