Topic: changed crankshaft sensor but still wont start (Read 3333 times)

feeutfo · « **Reply #15 on:** 25 June 2012, 14:58:46 »

It's well known on here that pattern sensors are shite. Maf code is common with crank sensor fault.

Fit a GM genuine sensor from a dealer. Used no good either as they can't be removed from the oil pipes without damage.

Must be new, genuine, vx, from a dealer.

But you may well be asked which plug shape the car has. They can't tell from the system so take the pattern one with you. It's got to come off anyway.

dbug · « **Reply #16 on:** 25 June 2012, 23:48:44 »

Fit genuine Vx crank sensor mate - pattern are at best krap

beany · « **Reply #17 on:** 27 June 2012, 23:04:09 »

You guys are very cool! :-) Fitted a genuine part and it worked just as you said it would. Thank you all for very informative advice.

adrian007 · « **Reply #18 on:** 01 July 2012, 16:11:12 »

could anyone explain to me how to fit a crank shaft sensor on a omega ??

SIR Philbutt · « **Reply #19 on:** 01 July 2012, 16:34:48 »

Quote from: adrian007 on 01 July 2012, 16:11:12

could anyone explain to me how to fit a crank shaft sensor on a omega ??

follow this link for everything you ever need to know about everything

http://www.omegaowners.com/forum/index.php?board=12.0

then go in gen disc to find out about everything else

albitz · « **Reply #20 on:** 01 July 2012, 17:43:41 »

And if you get stuck,you have an Omega expert living on your doorstep. Known on here as Darth Loo-knee.

News:

Author Topic: changed crankshaft sensor but still wont start (Read 3333 times)

feeutfo

Re: changed crankshaft sensor but still wont start

dbug

Re: changed crankshaft sensor but still wont start

beany

Re: changed crankshaft sensor but still wont start

adrian007

Re: changed crankshaft sensor but still wont start

SIR Philbutt

Re: changed crankshaft sensor but still wont start

albitz

Re: changed crankshaft sensor but still wont start